OBD code P0455 indicates that the vehicle’s on-board diagnostics system has detected a large leak in the evaporative emission control system. This could result from issues such as a loose or damaged gas cap, a cracked or disconnected hose, or a damaged charcoal canister.
1. What are the possible symptoms ?
1. Check Engine Light is illuminated
2. Strong fuel odor
3. Decreased fuel efficiency
4. Hissing or hissing sound near the fuel tank
5. Difficulty starting the engine
2. What are the most probable causes ?
1. Loose or damaged gas cap
2. Leaking or damaged evaporative emission system hoses
3. Faulty purge control valve
4. Cracked or damaged charcoal canister
5. Leaking fuel tank filler neck
3. Is it safe to drive with this fault not fixed?
It is generally safe to drive with the OBD fault code P0455, but it should be addressed at the earliest convenience to prevent potential emissions issues.
4. What is the severity level of this fault code ?
The P0455 code indicates a large leak in the evaporative emission system, which can result in increased emissions and decreased fuel efficiency. It is a relatively common fault and should be addressed promptly to prevent further environmental impact and potential engine performance issues.
5. How much will cost to repair this fault ?
The cost to repair OBD fault code P0455 can vary but typically ranges from $200 to $500, depending on the extent of the leak and the specific repairs needed. It’s recommended to consult a mechanic for an accurate assessment and cost estimate.
6. Troubleshooting – List of most reported fixes :
1. Check for a loose or damaged gas cap and replace if necessary.
2. Inspect the EVAP system hoses and connections for cracks or disconnections, and repair or replace as needed.
3. Test and replace the EVAP purge valve if it is found to be faulty or stuck open.
7. What are the most affected components by this fault code ?
1. Gas cap
2. Evaporative emission canister
3. Evaporative emission purge valve
4. Fuel filler neck
5. Evaporative emission hoses
6. Evaporative emission system pressure sensor
8. Several risks you may face if this issue is not fixed :
1. Reduced fuel efficiency
2. Increased emissions
3. Potential damage to the catalytic converter
4. Risk of failing emissions testing
5. Risk of ignition hazard due to fuel vapors
9. Most frequent questions people ask on AutoForums about this fault :
1. Q: What causes the P0455 fault code to appear?
A: The P0455 code is often triggered by a loose or faulty gas cap, damaged fuel tank filler neck, cracked or disconnected EVAP system hoses, or a malfunctioning EVAP canister purge valve.
2. Q: How can I diagnose the source of the P0455 code?
A: To diagnose the P0455 code, start by visually inspecting the gas cap and the entire EVAP system for signs of damage or disconnection. Utilize a smoke machine to test for leaks in the system and use a scan tool to perform an EVAP system leak test.
3. Q: I replaced the gas cap, but the P0455 code is still present. What should I do next?
A: If replacing the gas cap did not resolve the issue, it’s important to inspect the EVAP system for leaks, especially focusing on the fuel tank filler neck, EVAP system hoses, and EVAP canister purge valve for potential problems.
4. Q: Can the P0455 code cause any other problems with my vehicle?
A: While the P0455 code itself may not directly affect the vehicle’s performance, it can lead to increased emissions and potential fuel economy issues. Additionally, it’s important to address the issue to ensure the vehicle passes emissions tests.
5. Q: I don’t have the tools to diagnose the P0455 code. Should I take my car to a mechanic?
A: If you’re unable to perform a proper diagnosis of the P0455 code, it’s recommended to take your vehicle to a qualified mechanic who can utilize professional diagnostic equipment to identify the source of the EVAP system leak.
10. Diagnostic cautions and safety measures :
1. Ensure the fuel cap is properly tightened and in good condition.
2. Check for visible damage or cracks in the evaporative emission control system components.
3. Inspect the EVAP system hoses and connections for leaks or damage.
4. Verify the integrity of the EVAP canister and purge valve.
5. Consider environmental factors that could affect the EVAP system, such as extreme temperatures or driving conditions.
This article was crafted using OBDQuest, the app that demystifies OBDII codes with clear explanations, fixes, and troubleshooting tips. Download OBDQuest from Google Play or the App Store. Subscription is at lowest price right now. Get started today and simplify your car diagnostics.
Fix My OBD2 
Leave a comment